H3C Technologies H3C SecPath F1000-E - Manual (Page 400)

10
Figure 14 Assign GigabitEthernet 0/1 to VLAN 100 as a tagged member
• Find GigabitEthernet 0/1 in the port list and select the Tagged Member option for it.
• Click Apply to end the operation.
Step2 Configure Device B
Configure Device B as you configure Device A.
Verifying the configuration
# Display the port statistics of GigabitEthernet 0/1 on Device A.
• Select Device Management > Interface from the navigation tree.
• Click GigabitEthernet0/1 on the page that appears to enter the page displaying the port
statistics of GigabitEthernet 0/1, as shown in Figure 15 .