H3C Technologies H3C SecPath F1000-E User Manual
Page 847
18
Figure 17 Create VRRP group 2
•
Type 2 in the VRID text box.
•
Type 202.38.160.112 in the Virtual IP text box and click Add to add the virtual IP address to
the Virtual IP Members text box.
•
Click Apply.
# Set the priority of Device A in VRRP group 1 to 110.
•
On the VRRP group page of GigabitEthernet 0/1, click the icon corresponding to VRRP group 1
.
Figure 18 Set the priority of Device A in VRRP group 1
•
Type 110 in the Priority text box.
•
Click Apply.
Step2
Configure Device B (The Web interfaces for configuring Device B are similar to those when you configure
Device A. Omitted here.)
# Configure the IP address of each interface and the zones. (Omitted)
# Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.111.