H3C Technologies H3C SecPath F1000-E - Manual (Page 798)

24
Figure 25 Generate an RSA key pair
• Click Apply to generate an RSA key pair.
# Retrieve the CA certificate.
• Select VPN > PKI > Certificate from the navigation tree and then click Retrieve Cert to
perform the configurations shown in Figure 26 .
Figure 26 Retrieve the certificate
•
• Select torsa as the PKI domain.
• Select CA as the certificate type.
• Click Apply.
# Request a local certificate.
• Select VPN > PKI > Certificate from the navigation tree and then click Request Cert to perform
the configurations shown in Figure 27 .
Figure 27 Request a certificate
• Select torsa as the PKI domain.
• Select Password and then type challenge-word as the password.