Allied Telesis AT-S60 - Manual (Page 837)

AT-S60 Management Software User’s Guide
837
VLAN Default Settings
This section provides VLAN, GARP, and GVRP default settings.
VLAN Default
Settings
The following table lists the VLAN default settings.
GARP and GVRP
Default Settings
The following table lists the GARP and GVRP default settings.
VLAN Setting Default
Default VLAN Name Default_VLAN (all ports)
Management VLAN ID 1 (Default_VLAN)
VLAN Mode User Configured
Uplink Port None
GARP and GVRP Setting Default
GVRP Status Disabled
GVRP GIP Status Enabled
GVRP Join Timer 20
GVRP Leave Timer 60
GVRP Leave All Timer 1000
Port Mode Normal
Mode Normal (all ports on your switch)
Mode None None