Allied Telesis AT-S60 - Manual (Page 430)

Chapter 18: Virtual LANs
Section IV: VLANs 430
4 - Clear Ports from VLAN
To remove all ports from the VLAN, do the following:
a. Type 4 to select Clear Ports from VLAN.
The following prompt is displayed:
Enter VLAN ID: [2 to 4094] ->
b. Enter the VID of the VLAN you want to change.
All tagged and untagged ports are removed from the VLAN.
c. After modifying a VLAN, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.
5 - Change GARP VLAN
To convert a dynamic GVRP VLAN or a dynamic GVRP port to a static
VLAN or port, do the following:
a. Type 5 to select Change GARP VLAN.
The following prompt is displayed:
Enter VLAN ID: [2 to 4094] ->
b. Enter the VID of the dynamic GVRP VLAN or the static VLAN
containing the dynamic port you want to convert. You can specify
only one VLAN.
The dynamic VLAN or port is changed to a static VLAN or port.
You can now modify or delete the VLAN like any other tagged
VLAN.
Note
For background information on GVRP, refer to Chapter 20, GARP
VLAN Registration Protocol on page 444.
c. After modifying a VLAN, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.