Allied Telesis AT-S60 - Manual (Page 713)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 713
SNMP users, but you do not want to encrypt messages using a
privacy protocol. You can select this value if you configured the
Security Model parameter with the SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol.
Select this security level to allow authentication and encryption.
This level provides the greatest level of security. You can select
this value if you configured the Security Model parameter with
the SNMPv3 protocol.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
11. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Access Table to the configuration file. After making
changes to an Access Table entry with a Volatile storage type,
Save Changes does not appear on the General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the Access Table to the configuration file. After making changes
to an Access Table entry with a NonVolatile storage type, Save
Changes appears on the General Tab.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 Access Table entry will take
effect immediately.
12. Click Apply to update the SNMPv3 Access Table.
13. To save your changes, return to the General Tab and click Save
Changes.