Allied Telesis AT-S60 - Manual (Page 760)

Chapter 41: Port-based VLANs
Section VI: Web Browser Management 760
Modifying a Port-Based VLAN
To modify a port-based or tagged VLAN, perform the following
procedure:
1. From the Home Page, select Configuration.
The Configuration System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 Page is displayed with the MAC Address Tab selected
by default, as shown in Figure 212 on page 634.
3. Select the VLAN Tab.
The VLAN Tab is shown in Figure 275 on page 756.
4. In the VLANs section, click Configure.
The Port-Based VLANs Page is displayed in Figure 276 on page
757.
5. Click the circle next to the name of the VLAN you want to modify.
6. Click Modify.