Allied Telesis AT-S60 - Manual (Page 158)

Chapter 10: File System Configuration
158
Creating a
System
Configuration
File
This procedure allows you to save your system configuration to a file on
the switch. You may want to save a copy of your system configuration
file to download it onto another switch. Or, you may want to create a
backup of your current configuration file.
If the system configuration file does not reflect the current configuration
on the system, the S - Save Configuration appears on the Main Menu. If
you want to save your configuration changes, select S - Save
Configuration from the Main Menu.
To create a system configuration file, perform the following procedure:
1. From the Main Menu, type 9 to select File Menu.
The File Menu is shown in Figure 41 on page 157.
2. From the File Menu, type 3 to select Create Configuration File to
create a new configuration file.
The following prompt is displayed:
Enter Configuration File Name:
3. Enter a configuration file name.
You can enter up to 16 alphanumeric characters followed by .cfg.
See File Naming Conventions on page 154.
Note
If a filename already exists, the system displays a message asking if
you want to overwrite the existing file name. Follow the prompts.
Note
You cannot name a configuration file default.cfg. This file name is
reserved by the switch.
The following message is displayed:
Saving...Please wait 15 seconds before rebooting the
system.