Allied Telesis AT-S60 - Manual (Page 67)

AT-S60 Management Software User’s Guide
Section I: Basic Features 67
8. To configure SNMPv1 and SNMPv2 access, type 8 to select Configure
SNMP.
The Configure SNMP Menu is displayed in Figure 22 on page 87.
See Chapter 5, SNMPv1 and SNMPv2c Configuration on page 84
for details about how to configure SNMPv1 and SNMPv2.
If you disable SNMP access, no one can manage the switch
remotely using an SNMP management program.
9. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Your changes are immediately activated on the switch.