Allied Telesis AT-S60 - Manual (Page 568)

Chapter 28: 802.1x Port-based Access Control
Section V: Security Features 568
Configuring RADIUS Accounting
The AT-S60 management software supports RADIUS accounting for
ports operating in the Authenticator role. The accounting information
sent by the switch to a RADIUS server includes the date and time when
clients log on and log off, as well as the number of packets sent and
received by a port during a client session. For background information
on this feature, refer to RADIUS Accounting on page 556. This feature is
disabled by default on the switch.
To configure this feature, perform the following procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 151 on page 473.
2. From the Security Menu, type 3 to select Port Access Control.
The Port Access Control Menu is shown in Figure 180 on page 557.
3. From the Port Access Control Menu, type 7 to select Configuring
Accounting.
The RADIUS Accounting Menu is shown in Figure 186.
Figure 186 Radius Accounting Menu
4. To activate or deactivate RADIUS accounting on the switch, type 1 to
select Radius Accounting Status.
The following prompt is displayed:
RADIUS Accounting (E-Enable, D-Disable):
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Production Switch 142
User: Manager 00:14:33 25-Jan-2004
Radius Accounting
1 - Radius Accounting Status............ Disabled
2 - Radius Accounting Port.............. 1813
3 - Radius Accounting Type.............. Network
4 - Radius Accounting Trigger Type...... Start_Stop
5 - Radius Accounting Update Status..... Disabled
6 - Radius Accounting Update Interval... 60
R - Return to Previous Menu
Enter your selection?