Allied Telesis AT-S60 - Manual (Page 144)

Chapter 9: Port Mirroring
Section I: Basic Features 144
Creating a Port Mirror
Use the following procedure to create a port mirror. For information
about how to specify a port, see Specifying Ports on page 34.
To create a port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
The Port Menu is shown in Figure 26 on page 102.
2. From the Port Menu, type 5 to select Port Mirroring.
The Port Mirroring menu is shown in Figure 39.
Figure 39 Port Mirroring Menu
3. Type 1 to select Create Mirror.
The following prompt is displayed:
Enter Destination Port:
4. Enter the number of the port that functions as the mirror port (that is,
the port where the traffic is copied) and press Return.
You can specify only one mirror port. For information about how
to specify a port, see Specifying Ports on page 34.
5. The following prompt is displayed:
Enter the Source Port(s) [port-list]:
6. Enter a single port or a list of nonconsecutive ports on different line
cards whose traffic is to be mirrored. Press Return.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
High School Switch 142
User: Manager 00:14:33 15-Jan-2004
Port Mirroring
Destination Port Source Port(s) Status
-------------------------------------------------------------
1 - Create Mirror
2 - Modify Mirror
3 - Delete Mirror
4 - Enable Mirror
5 - Disable Mirror
U - Update Display
R - Return to Previous Menu
Enter your selection?