Allied Telesis AT-S60 - Manual (Page 704)

Chapter 40: SNMPv3 Protocol
Section VI: Web Browser Management 704
DES
Select this value to make the DES privacy (or encryption) protocol
the privacy protocol for this User Table entry. With this selection,
messages transmitted between the host and the switch are
encrypted with the DES protocol.
9. In the Privacy Password field, enter a privacy password of up to 32
alphanumeric characters.
10. In the Confirm Privacy Password field, re-enter the privacy password.
11. In the Storage Type field, enter one of the following storage options
for this User Table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 User Table to the configuration file. After
making changes to an SNMPv3 User Table entry with a Volatile
storage type, Save Changes does not appear on the General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the SNMPv3 User Table to the configuration file. After making
changes to an SNMPv3 User Table entry with a NonVolatile
storage type, Save Changes appears on the General Tab.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 User Table entry takes effect
immediately.
12. Click Apply to update the SNMPv3 User Table.
13. To save your changes, return to the General Tab and click Save
Changes.