Allied Telesis AT-S60 - Manual (Page 571)

AT-S60 Management Software User’s Guide
Section V: Security Features 571
Displaying Port-based Access Control Status
There are three ways to display port-based access control status. You can
display:
❑ Port roles assigned to all ports
❑ All Authenticator ports and their associated parameters
❑ All Supplicant ports and their associated parameters
Each type of display provides different parameters. The advantage of
displaying the individual authenticator and supplicant port information
is that more information is given.
Displaying Port
Access Status
To display the port access status of all the ports on the switch as None,
Authenticator, or Supplicant, perform the following procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 151 on page 473.
2. From the Security Menu, select Port Access Control.
The Port Access Control Menu is shown in Figure 180 on page 557.
3. From the Port Access Control Menu, type 6 to select Display Port
Access Status.