Allied Telesis AT-S60 - Manual (Page 794)

Chapter 44: Web Server Security
Section VI: Web Browser Management 794
Displaying the SSL Settings
To view the SSL settings, perform the following procedure:
Note
You cannot set up SSL from a web browser management session. To
set up SSL, use a local or Telnet management session. For more
information, see Configuring SSL on page 528.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the Layer 2 option.
The Monitoring Layer 2 Page is displayed with the MAC Address
Tab selected by default, as shown Figure 212 on page 634.
3. Select the Security option.
The Monitoring Security Page opens with the Keys Tab displayed
by default as shown in Figure 291 on page 788.
4. Select the SSL Tab.
The SSL Tab is shown in Figure 294.
Figure 294 Monitoring Security Page, SSL Tab