Allied Telesis AT-S60 User Manual
Page 281
AT-S60 Management Software User’s Guide
Section II: Advanced Features
281
The MSTI Menu is shown in Figure 94.
Figure 94 MSTI Menu
The fields in the table are defined below:
MSTI
Lists the MSTI IDs existing on the switch.
Priority
Specifies the MSTI priority value for the MSTI. The steps in this
procedure explain how you can assign this value when you create
an MSTI ID and how to modify the value for an existing MSTI ID.
Regional Root ID
Identifies the regional root for the MSTI by its MAC address.
Path Cost
Specifies the path cost from the bridge to the regional root. If the
bridge is the regional root, the value is 0.
Associated VLANs
Specifies the VIDs of the VLANs that have been associated with
the MSTI ID.
The table does not include the CIST. The table is empty if no MSTI
IDs have been created.
4. Type 1 to select Create MSTI.
The following prompt is displayed:
Enter the MSTI ID to be created: [1 to 15] ->
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Engineering Switch 142
User: Manager
00:14:33 15-Jan-2004
MSTI Menu
MSTI | Priority | Regional Root ID|
Path Cost |
Associated VLANs
---------------------------------------------------------------
1
32768
00A0D2 1454B3
0
1,2
2
32768
00A0D2 1454B3
0
4,11
1 - Create MSTI
2 - Delete MSTI
3 - Modify MSTI
U - Update Display
R - Return to Previous Menu
Enter your selection?