Allied Telesis AT-S60 - Manual (Page 754)

Chapter 40: SNMPv3 Protocol
Section VI: Web Browser Management 754
Displaying
SNMPv3
Community
Table Entries
To display entries in the SNMPv3 Community Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the SNMP Tab.
The SNMP Monitoring Tab is shown in Figure 195 on page 596.
3. From the SNMP Monitoring Tab, click the circle next to the View
Community Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 Community Table Page is shown in
Figure 274.
Figure 274 Monitoring, SNMPv3 Community Table Page