Allied Telesis AT-S60 - Manual (Page 22)

Preface
22
How This Guide is Organized
This manual is divided into the following six sections:
❑ Section I: Basic Features
❑ Section II: Advanced Features
❑ Section III: SNMPv3 Protocol
❑ Section IV: VLANs
❑ Section VI: Security Features
❑ Section VII: Web Browser Management
See the description of each section below.
Overview
The Overview chapter reviews the different ways that you can access the
AT-S60 management software on a switch. In addition, it describes how
to specify ports.
Section I: Basic Features
This section explains how to manage a switch from a local or a Telnet
management session. The chapters in this section discuss basic features
such as port configuration, MAC address configuration, and port
trunking as well as many other features.
Section II: Advanced Features
The chapters in this section explain how to use advanced features such
as file system configuration, file downloads and uploads, and the Event
log to manage a switch from a local or Telnet management session.
Section III: SNMPv3
There is one chapter in this section that provides a description of the
AT-S60 software implementation of the SNMPv3 protocol. In addition, it
provides procedures that allow you to create and modify SNMPv3 users
from a local or Telnet management session.
Section IV: Security Features
This section describes how to configure tagged and port-based VLANs,
Multiple VLAN modes, and the GARP VLAN Registration Protocol (GVRP)
from a local or Telnet management session.