Allied Telesis AT-S60 - Manual (Page 803)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 803
Displaying the TACACS+ Settings
To display the TACACS+ RADIUS settings, perform the following
procedure:
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the Server-based Authentication Tab.
The Server-based Authentication Tab is shown in Figure 298.
Figure 298 Monitoring System Page, Server-based Authentication Tab
3. Click the TACACS+ Settings button.
4. Click View.