Allied Telesis AT-S60 - Manual (Page 721)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 721
5. In the Group Name field, enter a Group Name that you configured in
the SNMPv3 Access Table.
See Creating an Access Table on page 710.
There are four default values for this field that are reserved for
SNMPv1 and SNMPv2c implementations:
❑ defaultV1GroupReadOnly
❑ defaultV1GroupReadWrite
❑ defaultV2cGroupReadOnly
❑ defaultV2cGroupReadWrite
6. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the SecurityToGroup Table to the configuration file. After
making changes to a SecurityToGroup Table entry with a Volatile
storage type, Save Changes does not appear on the General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the SecurityToGroup Table to the configuration file. After making
changes to a SecurityToGroup Table entry with a NonVolatile
storage type, Save Changes appears on the General Tab.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 SecurityToGroup Table entry
takes effect immediately.
7. Click Apply to update the SNMPv3 SecurityToGroup Table.
8. To save your changes, return to the General Tab and click Save
Changes.