Allied Telesis AT-S60 User Manual
Page 208
Chapter 12: Event Log
Section II: Advanced Features
208
5. Choose one or more of the following selections:
The default is to display informational events, error messages, and
warning messages. You can select more than one severity at a
time by separating severities with a comma—for example, E,W.
6. To display the events of a selected AT-S60 software module, type 7 to
select Event Module.
The following prompt is displayed:
Enter Modules to display (ALL, SYSTEM, CLI, EVTLOG, MAC,
STP, VLAN, GARP, PCFG, PMIRR, PTRUNK, PSEC, PACCESS, IP,
ESTACK, FILE, IGMP,TIME,TFTP, HTTP, TELNET, SNMP, RADIUS,
TACACS, ENCO, PKI, SSL, SSH) ->
7. Select one or more software modules to display.
Enter a list of modules separated by a comma—for example,
“system, stp, ptrunk.” For a list of the modules and their
abbreviations, refer to Software Modules on page 210. The default
is ALL, which displays the events for all modules.
8. Once you have set the log filters, type V to select View Log.
Table 6 Event Log Severity Levels
Value
Severity Level
Description
ALL
All levels
Displays all of the following message
types.
E
Error
Switch operation is severely impaired.
W
Warning
An issue may require manager attention.
I
Information
Useful information that can be ignored
during normal operation.
D
Debug
Detailed high-volume information that is
intended for Technical Support.