Allied Telesis AT-S60 - Manual (Page 574)

Chapter 28: 802.1x Port-based Access Control
Section V: Security Features 574
The Display Authenticator Port Access Parameters Menu is shown
in Figure 188.
Figure 188 Display Authentication Port Access Parameters
For information about the fields in the Display Authenticator Port Access
Parameters menu, see the parameter descriptions in Configuring
Authenticator Parameters on page 561.
Displaying
Supplicant
Ports
To display information about supplicant ports and parameters, perform
the following procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 151 on page 473.
2. From the Security Menu, select Port Access Control.
The Port Access Control Menu is shown in Figure 180 on page 557.
3. From the Port Access Control menu, type 5 to select Configure
Supplicant.
The Configure Supplicant menu is shown in Figure 184 on page
566.
4. Type 2 to select Display Supplicant Port Access Parameters.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Production Switch 142
User: Manager 00:14:33 25-Jan-2004
Display Authenticator Port Access Parameters
Port PortCtrl QuietP TxP ReAuthP SuppTO SvrTO MaxReq
---------------------------------------------------------------
4.1 Auto 650 30 2000 20 2 9
8.8 Auto 650 30 2000 20 2 9
9.5 Auto 650 30 2000 20 2 9
R - Return to Previous Menu
Enter your selection?