Allied Telesis AT-S60 - Manual (Page 639)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 639
Deleting MAC Addresses
To delete a static, dynamic, or multicast MAC address from the switch,
perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration System Page is displayed with the General Tab
selected by default, as shown in Figure 192 on page 584.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 Page is displayed with the MAC Address Tab selected
by default, as shown in Figure 212 on page 634.
3. Select one of the MAC address options.
For instructions, refer to Displaying the MAC Address Table on
page 634.
4. Click View.
The MAC Address Table is displayed as shown in Figure 213 on
page 635.
5. Click the circle next to the MAC address that you want to delete from
the switch.
6. Click Remove.
The address is removed from the MAC address table.
7. Click Close.
The MAC Addresses Table Page is displayed as shown in Figure
212 on page 634.
8. Click Close.
The MAC Address Tab is redisplayed. Your changes are
immediately activated on the switch.
9. To save your changes, return to the General Tab and click Save
Changes. Your changes are saved on the switch.