Allied Telesis AT-S60 - Manual (Page 750)

Chapter 40: SNMPv3 Protocol
Section VI: Web Browser Management 750
Displaying
SecurityToGroup
Table Entries
To display entries in the SNMPv3 SecurityToGroup Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the SNMP Tab.
The SNMP Monitoring Tab is shown in Figure 195 on page 596.
3. From the SNMP Monitoring Tab, click the circle next to the View
SecurityToGroup Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 SecurityToGroup Table Page is shown in
Figure 270.
Figure 270 Monitoring, SNMPv3 SecurityToGroup Table Page