Allied Telesis AT-S60 - Manual (Page 629)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 629
❑ Down - indicates that the port and the end node have not
established a valid link.
Neg
The status of Auto-Negotiation on the port. Possible values are:
❑ Auto - Indicates that the port is using Auto-Negotiation to set
operating speed and duplex mode.
❑ Manual - Indicates that the operating speed and duplex mode
have been set manually.
MDI/X
The operating configuration of the port. Possible values are Auto,
MDI, MDI-X. The status Auto indicates that the port is
automatically determining the appropriate MDI or MDI-X setting.
Speed
The operating speed of the port. Depending on the port you
specified, possible values are:
❑ 0010 - Indicates 10 Mbps.
❑ 0100 - Indicates 100 Mbps.
❑ 1000 - Indicates 1000 Mbps.
Duplex
The duplex mode of the port. Possible values are half-duplex and
full-duplex.
PVID
The port VLAN identifier currently assigned to the port.
Flow Ctrl
The flow control setting for the port. Possible values are:
❑ Disabled - No flow control occurs on the port.
❑ Enabled - Flow control occurs on the port.