Allied Telesis AT-S60 - Manual (Page 748)

Chapter 40: SNMPv3 Protocol
Section VI: Web Browser Management 748
Displaying View
Table Entries
To display entries in the SNMPv3 View Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the SNMP Tab.
The SNMP Monitoring Tab is shown in Figure 195 on page 596.
3. From the SNMP Monitoring Tab, click the circle next to View View
Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 View Table Page is shown in Figure 268.
Figure 268 Monitoring, SNMPv3 View Table Page