Allied Telesis AT-S60 User Manual

Page 480

Chapter 22: Web Server

Section V: Security Features

480

5. Type 1 to select Status to enable or disable the web server. To

configure the web server, you need to first disable it.

Toggle between the following values:

Enabled - enables the web server. This is the default setting.

Disabled - disables the web server.

6. Type 2 to select Mode to determine the mode of the web server.

The following prompt appears:

Enter Web Server Mode (1 - HTTP, 2 - HTTPS):
[1 to 2] ->

Choose from the following selections:

1 - HTTP to select the HTTP mode for the web server. This is the
default value.

2 - HTTPS to select the HTTPS secure mode web server. By
selecting this value, you are enabling the SSL protocol on the web
server.

Note

The SSL Key ID field only appears when you configure the Mode field
as HTTPS.

The following prompt appears:

Enter Port Number [1 to 65531]-> 443

7. Enter a port number.

The default HTTPS web server port number is 443.

The following prompt appears:

Enter SSL Key ID ->

8. Enter an SSL Key ID.

9. Type 1 to select Status to enable the web server

Select Enabled to enable the web server.

10. After making changes, type R to until you return to the Main Menu.

Then type S to select Save Configuration Changes.