Allied Telesis AT-S60 - Manual (Page 352)

Chapter 17: SNMPv3 Configuration
Section III: SNMPv3 Protocol 352
The Modify SNMPv3 Notify Table Menu is displayed as shown in
Figure 111.
Figure 111 Modify SNMPv3 Notify Table Menu
Note
To display a Group Name and its associated parameters from the
Configure SNMPv3 SecurityToGroup Table Menu, type N to display
the Next Page and P to display the previous page.
4. To modify the Notify Tag, type 1 to select Set Notify Tag.
The following prompt is displayed:
Enter Notify Name:
5. Enter a Notify Name.
The following prompt is displayed:
Enter Notify Tag:
6. Enter the new Notify Tag.
Enter an alphanumeric value of up to 32 characters.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Marketing Switch 17
User: Manager 00:14:33 15-Jan-2004
Modify SNMPv3 Notify Table
Notify Name ................... softwareeengineering
Notify Tag..................... softwareeengineeringtag
Notify Type.................... Inform
Storage Type .................. NonVolatile
Row Status .................... Active
1 - Set Notify Tag
2 - Set Notify Type
3 - Set Storage Type
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?