Allied Telesis AT-S60 - Manual (Page 207)

AT-S60 Management Software User’s Guide
Section II: Advanced Features 207
Displaying Events
To specify the types of events you want to display in the event log,
perform the following procedure:
1. From the Main menu, type E to select Event Log.
The Event Log menu is shown in Figure 64 on page 205.
Note
The 3 - Event Output option is a read-only field. The selection is
always set to Temporary.
2. To select the order of the events in the log, type 4 to select the Event
Order.
Toggle between the following selections:
Chronological
This option displays the events in from the oldest event to the
most recent event. The default is Chronological.
Reverse Chronological
This option displays the events from the most recent event to the
oldest event.
3. To select the format of the event log, type 5 to select Event Mode.
Toggle between the following selections:
Normal
This option displays the time, software module, severity, and
description for each event. The default is Normal.
Full
This option displays the same information as Normal, plus
filename, line number, and event ID.
4. To display events of a selected severity, type 6 to select Event
Severity.
The following prompt is displayed:
Enter Severity levels to display (ALL, E - Error, W -
Warning, I - Information, D - Debug) ->