Allied Telesis AT-S60 - Manual (Page 185)

AT-S60 Management Software User’s Guide
Section II: Advanced Features 185
Downloading a File Using TFTP
To download a certificate, certificate enrollment requests, configuration,
and key files using TFTP, perform the following procedure:
1. If you are using a Telnet management session, go to step 2. If you are
using a local management session, type T at the prompt displayed in
Step 4 in the procedure that begins on page 180.
The following prompt is displayed:
TFTP server IP address:
2. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
3. Enter the remote file name of the file on the TFTP server that you want
to download.
Note
The file name can be a maximum of 20 characters long.
Note
The file you are downloading must be stored in the download
directory of the TFTP server.
If the file name format is correct, the following prompt is
displayed:
Local file name:
4. Enter a name for the file after it is downloaded to the switch.
Note
The file name can be a maximum of 20 characters long.
Note
The file you are downloading must be stored in the download
directory of the TFTP server.
If the local file name you entered already exists on the switch, the
following message is displayed:
The specified local file exists already.
Press any key to continue.