Allied Telesis AT-S60 - Manual (Page 645)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 645
Modifying a Port Trunk
This procedure allows you to modify a port trunk using a web browser
management session.
To modify a port trunk, perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration System Page is displayed with the General Tab
selected by default, as shown in Figure 192 on page 584.
2. From Configuration menu, select the Layer 1 option.
The Layer 1 Page is displayed with the Port Settings Tab shown by
default, as shown in Figure 207 on page 621.
3. Select the Port Trunking Tab.
The Port Trunking Tab is shown in Figure 215 on page 642.
4. Select Modify.