Allied Telesis AT-S60 - Manual (Page 738)

Chapter 40: SNMPv3 Protocol
Section VI: Web Browser Management 738
Note
Enter a value for the Message Processing Model field only if you
select SNMPv1 or SNMPv2c as the Security Model. If you select the
SNMPv3 protocol as the Security Model, then the switch
automatically assigns the Message Processing Model to SNMPv3.
5. In the Message Processing Model field, enter a Security Model that is
used to process messages.
Select one of the following SNMP protocols:
v1
Select this value to process messages with the SNMPv1 protocol.
v2c
Select this value to process messages with the SNMPv2c protocol.
v3
Select this value to process messages with the SNMPv3 protocol.
6. In the Security Model field, select one of the following SNMP
protocols as the Security Model for this Security Name, or User Name.
v1
Select this value to associate the Security Name, or User Name,
with the SNMPv1 protocol.
v2c
Select this value to associate the Security Name, or User Name,
with the SNMPv2c protocol.
v3
Select this value to associate the Security Name, or User Name,
with the SNMPv3 protocol.
7. In the Security Name field, enter a User Name that you previously
configured with the SNMPv3 User Table.
See Creating a User Table Entry on page 698.
8. In the Security Level field, select one of the following Security Levels:
Note
The value you configure for the Security Level must match the value
configured for the User Name in the SNMPv3 User Table Menu. See
Creating a User Table Entry on page 698.
No Authentication/Privacy
This option represents neither an authentication nor privacy
protocol. Select this security level if you do not want to
authenticate users and you do not want to encrypt messages
using a privacy protocol. This security level provides the least
security.