Allied Telesis AT-S60 - Manual (Page 800)

Chapter 45: TACACS+ and RADIUS Protocols
Section VI: Web Browser Management 800
Global Server Timeout
This parameter specifies the maximum amount of time the switch
waits for a response from a TACACS+ server before assuming the
server cannot respond. If the timeout expires and the server has
not responded, the switch queries the next TACACS+ server in the
list. If there aren’t any more servers, then the switch defaults to the
standard Manager and Operator accounts. The default is 30
seconds. The range is from 1 to 30 seconds.
IP Address and Encryption Key
Use these fields to specify the IP addresses and encryption secrets
of up to three network servers containing TACACS+ server
software. You can leave an encryption field blank if you entered
the server’s secret in the Global Secret field.
5. After you have finished configuring the parameters, click Apply.
6. To save your changes, return to the General Tab and click Save
Changes. The changes you made are saved on the switch.