Allied Telesis AT-S60 - Manual (Page 594)

Chapter 30: Basic Switch Parameters
Section VI: Web Browser Management 594
❑ Switch Mode - Defines the switch’s current VLAN mode. If this
parameter displays “Tagged,” the switch supports port-based and
tagged VLANs. If this parameter displays “Basic,” the switch is
operating in the Basic VLAN Mode. For information about VLANs,
refer to the overview sections in Chapter 18, Tagged and Port-
based Virtual LANs on page 401. For instructions on how to set the
switch’s VLAN mode from a web browser management session,
refer to Setting the Switch’s VLAN Mode on page 765.
❑ System Up Time - The number of days, hours, minutes, and
seconds since the switch was rebooted.
System Software
This section contains information about the version of the AT-S60
software and the version of the bootloader.
This section contains the following items:
❑ Application Software - This parameter lists the current version of
the AT-S60 software.
❑ Bootloader - This parameter lists the current version of the
bootloader software.
Hardware
This section contains information about the current line cards and
management card installed in the AT-8400 switch.
This section contains a table with the following headings:
❑ Slot# - This heading indicates which slot number the line card or
management card installed in the chassis. For example, in Figure
194 on page 592 under the heading Slot#, 1 indicates an AT-8411
line card installed in slot 1 of the chassis.
❑ Model Name - This heading indicates the name of the line card or
management card.
❑ Serial Number - This heading indicates the serial number that is
printed on the line card or management card.
❑ Temperature (Deg. C) - This heading indicates the current
temperature, in Celsius, of the line card or management card.
❑ Upper/Lower Temp. Threshold (Deg. C) - This heading indicates
the current upper and lower temperature thresholds, in Celsius,
for the line card.