Allied Telesis AT-S60 - Manual (Page 566)

Chapter 28: 802.1x Port-based Access Control
Section V: Security Features 566
The Configure Supplicant Menu is shown in Figure 184.
Figure 184 Configure Supplicant Menu
4. Type 1 to select Configure Supplicant Port Access Parameters to
configure supplicant parameters.
The following prompt is displayed:
Enter port-list:
5. Enter a port or a list of ports.
For information about how to specify ports, see Specifying Ports
on page 34.
The Configure Supplicant Port Access Parameters menu is shown
in Figure 185. The supplicant port access parameters are listed as
menu items with factory set default ranges.
Figure 185 Configure Supplicant Port Access Parameters Menu
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Production Switch 142
User: Manager 00:14:33 25-Jan-2004
Configure Supplicant
1 - Configure Supplicant Port Access Parameters
2 - Display Supplicant Port Access Parameters
R - Return to Previous Menu
Enter your selection?
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Production Switch 142
User: Manager 00:14:33 25-Jan-2004
Configure Supplicant Port Access Parameters
Configuring Ports 2.7
1 - Auth Period ......... 30 Seconds
2 - Held Period ......... 60 Seconds
3 - Max Start ........... 3
4 - Start Period ........ 30 Seconds
5 - User Name: ..........
6 - User Password: ......
R - Return to Previous Menu
Enter your selection?