Allied Telesis AT-S60 - Manual (Page 224)

Chapter 14: IGMP Snooping
Section II: Advanced Features 224
Displaying a List of Host Nodes
This procedure displays a list of the multicast groups on a switch, as well
as the host nodes. To display the list, perform the following procedure:
1. From the IGMP Snooping Configuration Menu, type 6 to select View
Multicast Hosts List.
For instructions on how to display the IGMP Snooping
Configuration Menu, perform Steps 1 to 4 of Configuring IGMP
Snooping on page 221.
The View Multicast Hosts List Menu is shown in Figure 68.
Figure 68 View Multicast Hosts List Menu
The information in this menu is for viewing purposes only. The
columns are defined below:
Multicast Group
The multicast address of the group.
VLAN
The VID of the VLAN where the port is an untagged member.
Port/TrunkId
This column displays host members present on either a port or a
trunk of the switch.
HostIP
The IP address(es) of the host node(s) connected to the port.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Engineering Switch 142
User: Manager 00:14:33 01-Jan-2004
View Multicast Hosts List
==============================================================
MulticastGroup VLAN
Port/TrunkId HostIP Status
==============================================================
01:00:5E:00:01:01
1 1.2-5/- 172.16.10.51 Active
01:00:5E:7F:FF:FA 1 8.3/- 149.35.2.75 Active
149.35.2.65 Active
01:00:5E:00:00:02 1 27/- 149.35.2.69 Active
01:00:5E:00:00:09 1 35/- 172.16.10.51 Active
U - Update Display
R - Return to Previous Menu
Enter your selection?