Allied Telesis AT-S60 - Manual (Page 588)

Chapter 30: Basic Switch Parameters
Section VI: Web Browser Management 588
Setting the System Time
To set system time manually on the switch, perform the following
procedure:
1. From the Home Page, select Configuration.
The Configuration System Page is displayed with the General Tab
selected by default, as shown in Figure 192 on page 584.
2. Select the System Time Tab.
The System Time Tab is shown in Figure 193.
Figure 193 Configuration System Page, System Time Tab
3. In the System Time section, specify the time and date for the switch.
For the time, use a 24 hour clock (or military time) and the
following format: hours, minutes, and seconds.
For the date, use two numbers to specify the day and month. Use
four numbers to specify the year. For example, enter September 5,
2003 as 05 09 2003.
4. Click Apply.