Allied Telesis AT-S60 User Manual
Page 286
Chapter 16: Multiple Spanning Tree
Section II: Advanced Features
286
Associating a VLAN to an MSTI ID
To associate a VLAN to an MSTP ID, do the following:
1. From the Main Menu, type 3 to select Spanning Tree Menu.
The Spanning Tree Menu is shown in Figure 91 on page 275.
2. From the Spanning Tree Menu, type 5 to select MSTP Configuration.
The MSTP Menu is shown in Figure 92 on page 277.
3. From the MSTP Menu, type V to select VLAN-MSTI Association Menu.
The VLAN-MSTI Association Menu is shown in Figure 95 on page
285.
4. From the VLAN-MSTI Association Menu, type 1 to select Add VLANs to
MSTI.
The following prompt is displayed:
Enter the MSTI ID
5. Enter the MSTI ID to which you want to associate a VLAN.
A prompt similar to the following is displayed:
Enter the list of VLANs:
6. Enter the VLAN ID of the virtual LAN you want to associate with the
MSTI ID.
You can enter more than one VLAN at a time (for example, 2,4,7).
To view VIDs, refer to Displaying VLANs on page 418.
The MSTI ID retains any VLANs already associated with it when
new VLANs are added.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Removing a VLAN from an MSTI ID
To remove a VLAN from an MSTP ID, do the following:
1. From the Main Menu, type 3 to select Spanning Tree Menu.
The Spanning Tree Menu is shown in Figure 91 on page 275.
2. From the Spanning Tree Menu, type 5 to select MSTP Configuration.
The MSTP Menu is shown in Figure 92 on page 277.
3. From the MSTP Menu, type V to select VLAN-MSTI Association Menu.
The VLAN-MSTI Association Menu is shown in Figure 95 on page
285.