Allied Telesis AT-S60 - Manual (Page 786)

Chapter 43: Port Security
Section VI: Web Browser Management 786
❑ Lock all ports: The Lock All Ports security level causes the switch to
immediately stop learning new dynamic MAC addresses on
behalf of the specified port.
For detailed information about the security mode parameter, see
Port Security Overview on page 470.
Intruder Action
Indicates the action taken by the port if the security on the port is
violated. Violating actions differ depending on the security level,
as described below:
❑ Limited - The port receives a frame with a new source MAC
address after the port has learned its maximum number of
dynamic MAC addresses.
❑ Secured - The port receives a frame with a MAC address that has
not been entered as a static address on the port.
❑ Locked - The port receives a frame with a new source MAC
address.
You can configure the port to take one of the following intrusion
actions if a violating event occurs:
❑ Discard - Discards the invalid frame.
❑ Trap - Discards the invalid frame and sends a trap to a
management workstation.
❑ Disable - Discards the invalid frame, sends a trap to a
management workstation, and disables the port.
Participating
Indicates the port is participating in port security.
MAC Limit
Indicates the maximum number of dynamic MAC addresses the
port can learn when it is operating under the Limited security
level.