Allied Telesis AT-S60 - Manual (Page 34)

Chapter 1: AT-S60 Overview
34
Specifying Ports
Many of the commands and parameters, in this manual involve
specifying the port(s) on the switch. Port numbers are specified in the
following format:
slot.port
Slot is the number of the slot in the switch that contains the line card.
There are twelve line card slots in the AT-8400 chassis. Port is the port
number on the line card. For example, to indicate port 4 on the line card
in Slot 8, enter:
8.4
In many commands, you can specify a list of ports. You can list ports on
the same line card individually, as a range, or both. The following
example refers to Ports 1, 3, and 5 through 8 on the line card in Slot 3:
3.1,3,5-8
Some commands can be performed on ports on different line cards. The
following example refers to Ports 1 and 4 on the line card in Slot 4 and
Ports 6 through 8 on the line card in Slot 11:
4.1,4,11.6-8