Allied Telesis AT-S60 - Manual (Page 612)

Chapter 31: File Downloads and Uploads
Section VI: Web Browser Management 612
Uploading a File
This procedure explains how to upload a file from the switch’s file
system to a TFTP server on your network using the web browser
interface. You can upload any of the following files:
❑ AT-S60 Image file
❑ Configuration file
❑ Public encryption key
❑ CA certificate
❑ CA enrollment request
Note
The public key, CA certificate, and CA enrollment request are only
supported on the version of AT-S60 management software that
features SSL, PKI, and SSH security.
Note the following before you begin this procedure:
❑ You must use TFTP to upload a file from a web browser
management session.
❑ There must be a node on your network that contains the TFTP
server software.
❑ You should start the TFTP server before you begin the upload
procedure.
To upload a file, perform the following procedure:
1. From the Home Page, select Configuration.
The System page is displayed with the General tab selected by
default.
2. Select the System Maintenance Tab.
Note
The System Maintenance Tab is shown in Figure 203 on page 610.
The top portion of the tab is used to return the switch to its factory
default settings. For instructions, see Returning the AT-S60 Software
to the Factory Default Values on page 606.
3. In the Server IP Address field, enter the IP address of the network node
that contains the TFTP server software.