Allied Telesis AT-S60 - Manual (Page 33)

AT-S60 Management Software User’s Guide
33
Management Access Levels
There are two levels of management access on an AT-8400 switch:
Manager and Operator. When you log in as a Manager, you can view and
configure all of a switch’s operating parameters. When you log in as an
Operator, you can only view the operating parameters. As an Operator,
you cannot change any values.
To log in, you enter a login id of Manager or Operator and the
appropriate password when you start an AT-S60 management session.
For Manager access, enter the following at the prompts:
Login: manager
password: friend
For Operator access, enter the following at the prompts:
Login: operator
password: operator
The password is case-sensitive for both Manager and Operator access.
There are a total of 14 login sessions available using the local, Telnet, and
web browser management sessions. However, you can have only one
Manager session on the switch regardless of how you or others are
accessing the switch. There are additional limitations for the different
types of management sessions. The local and Telnet sessions allow a
total of 10 active sessions. While a web browser management session,
allows four active login sessions.