Allied Telesis AT-S60 User Manual
Page 287
AT-S60 Management Software User’s Guide
Section II: Advanced Features
287
4. From the VLAN-MSTI Association Menu, type 2 to select Delete VLANs
from MSTI.
The following prompt is displayed:
Enter the MSTI ID
5. Enter the MSTI ID to which you want to associate a VLAN.
A prompt similar to the following is displayed:
Enter the list of VLANs:
6. Enter the VLAN ID of the virtual LAN that you want to remove from the
MSTI ID.
You can enter more than one VLAN at a time (for example, 2,4,7)
To view VIDs, refer to Displaying VLANs on page 418.
A removed VLAN is returned to CIST.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Associating VLANs to an MSTI ID and Deleting All Associated
VLANs
To associate VLANs to an MSTP ID while deleting all VLANs that are
already associated with it, do the following:
1. From the Main Menu, type 3 to select Spanning Tree Menu.
The Spanning Tree Menu is shown in Figure 91 on page 275.
2. From the Spanning Tree Menu, type 5 to select MSTP Configuration.
The MSTP Menu is shown in Figure 92 on page 277.
3. From the MSTP Menu, type V to select VLAN-MSTI Association Menu.
The VLAN-MSTI Association Menu is shown in Figure 95 on page
285.
4. From the VLAN-MSTI Association Menu, type 1 to select Add VLANs to
MSTI.
The following prompt is displayed:
Enter the MSTI ID
5. Enter the MSTI ID to which you want to associate a VLAN.
6. A prompt similar to the following is displayed:
Enter the list of VLANs:
7. Enter the VLAN ID of the virtual LAN that you want to associate with
the MSTI ID.