Allied Telesis AT-S60 - Manual (Page 732)

Chapter 40: SNMPv3 Protocol
Section VI: Web Browser Management 732
When an Inform message is generated, it requires a response from
the switch. The timeout value determines how long the switch
considers the Inform message an active message. This parameter
applies to Inform messages only. The range is from 0 to
2,147,483,647 milliseconds. The default value is 1500
milliseconds.
9. In the Retries field, enter the number of times the switch retries, or
resends, an Inform message.
When an Inform message is generated, it requires a response from
the switch. This parameter determines how many times the
switch resends an Inform message. The Retries parameter applies
to Inform messages only. The range is 0 to 255 retries. The default
is 3 retries.
10. In the Tag List field, enter a list of tags that you configured with the
Notify Tag parameter in a Notify Table entry.
See Creating a Notify Table Entry on page 722. Enter a Tag List of
up to 256-alphanumeric characters. Use a space to separate
entries, for example:
hwengtag swengtag testengtag
11. In the Target Parameters field, enter a Target Parameters name.
This name can consist of up to 32 alphanumeric characters. The
value configured here must match the value configured with the
Target Parameters Name parameter in the Target Parameters
Table.
12. In the Storage Type field, enter one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Target Address Table to the configuration file. After
making changes to a Target Address Table entry with a Volatile
storage type, Save Changes does not appear on the General Tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the Target Address Table to the configuration file. After making
changes to an Target Address Table entry with a NonVolatile
storage type, Save Changes appears on the General Tab.
13. Click Apply to update the SNMPv3 Target Address Table.
14. To save your changes, return to the General Tab and click Save
Changes.