Allied Telesis AT-S60 - Manual (Page 317)

AT-S60 Management Software User’s Guide
Section III: SNMPv3 Protocol 317
5. Enter subtree that this view will or will not be permitted to display.
You can enter either a numeric value in hex format or the
equivalent text name. For example, the OID hex format for TCP/IP
is:
1.3.6.1.2.1.6
The text format is for TCP/IP is:
tcp
The following prompt is displayed:
Enter Subtree Mask (Hex format):
6. Enter a subtree mask.
This is an optional parameter that is used to further refine the
value in the View Subtree parameter. This parameter is in binary
format.
The View Subtree parameter defines a MIB View and the Subtree
Mask further restricts a user’s view, for example, to a specific row
of the MIB tree. The value of the Subnet Mask parameter is
dependent on the subtree you select. See RFC 2575 for detailed
information about defining a subnet mask.
The following prompt is displayed:
Enter View Type [I-Included, E-Excluded]:
7. Enter one of the following view types:
I - Included
Enter this value to permit a user to see the subtree specified
above.
E - Excluded
Enter this value to not permit a user to see the subtree specified
above.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-NonVolatile]: