Allied Telesis AT-S60 - Manual (Page 511)

AT-S60 Management Software User’s Guide
Section V: Security Features 511
The Create Self-Signed Certificate Menu is shown in Figure 163.
Figure 163 Create Self-Signed Certificate Menu
7. Type 1 - Certificate Name to create an alphanumeric name for a
certificate.
The following message is displayed:
Enter certificate name (24 chars max) ->
Enter a certificate name of up to 24 alphanumeric characters. The
name you enter here is the filename of the certificate followed by
the .cer extension. The Certificate Name does not appear within
the certificate file.
8. Type 2 - Key Pair ID to associate a Key Pair ID with the certificate name.
The following message is displayed:
Enter certificate Key Pair ID -> [0 to 65535] ->
9. Enter a value from 0 to 65,535 and press Return.
You must enter a Key Pair ID value that you configured in the Key
Management menus. See Configuring Keys for Encryption on
page 491.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Engineering Switch 142
User: Manager 00:14:33 30-Apr-2004
Create Self-Signed Certificate
1 - Certificate Name.............
2 - Key Pair ID.................. 0
3 - Format....................... DER
4 - Serial Number................ 0
5 - Subject DN...................
6 - Create Self-Signed Certificate
R - Return to Previous Menu
Enter your selection?