Allied Telesis AT-S60 - Manual (Page 35)

AT-S60 Management Software User’s Guide
35
Specifying Time and Date
The Simple Network Time Protocol (SNTP) feature places the time and
date on the local and telnet interfaces. The time and date appear in the
upper right hand corner of the menu. See Figure 1.
Figure 1 Main Menu
When you access remote switches using the enhanced stacking feature,
the time and date set by the local switch appears. It is possible for a local
switch and a remote switch to display different time stamps. For
example, if you are using a switch in one time zone it displays the local
time. If you access a remote switch which is located in a different time
zone, the time on that switch reflects local time.
For information about how to configure the time and date, see Setting
the System Time on page 59.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
High School Switch 142
User: Manager 00:14:33 15-Feb-2004
Main Menu
1 - Port Menu
2 - VLAN Menu
3 - Spanning Tree Menu
4 - Administration Menu
5 - System Menu
6 - Security Menu
7 - MAC Address Tables
8 - Enhanced Stacking
9 - File Menu
C - Command Line Interface
Q - Quit
Enter your selection?