Allied Telesis AT-S60 - Manual (Page 761)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 761
The Modify VLAN Page is displayed as shown in Figure 278.
Figure 278 Modify VLAN Page
7. Modify the VLAN parameters by referring to Step 7 through Step 8 in
the previous procedure, Creating a Port Based VLAN on page 756.
When you modify a VLAN, observe the following guidelines:
❑ You cannot change the VID of a VLAN.
❑ You cannot change the name of any VLAN.
8. After making the desired changes, click Apply.
The modified VLAN is now ready for network operations.
Note
Untagged ports that are added to a VLAN are automatically
removed from their current VLAN assignment. Untagged ports that
are removed from a VLAN are returned to the Default_VLAN.
9. To save your changes, return to the General Tab and click Save
Changes. The changes you made are saved on the switch.