Allied Telesis AT-S60 - Manual (Page 560)

Chapter 28: 802.1x Port-based Access Control
Section V: Security Features 560
The Port Access Control Menu is shown in Figure 181.
Figure 181 Configure Port Access Role Menu
5. Type 1 to select Port Role.
The following prompt is displayed:
Enter new Port Role [N-None, A-Authenticator,
S-Supplicant] ->
6. Choose from the following:
A - Select A to choose Authenticator. With this selection, the port
performs the role of authenticating the supplicants that are
connected to the port.
S - Select S to choose Supplicant. With this selection, the port
becomes a Supplicant to the Authenticator port.
N - Select N to choose None. If you select None, the port does not
participate in port-based access control. The default for this
parameter is None.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn AT-8400 Series - ATS60 V2.1.0
Production Switch 142
User: Manager 00:14:33 25-Jan-2004
Configure Port Access Role
Configuring Port 3.1
1 - Port Role ........... None
R - Return to Previous Menu
Enter your selection?