Allied Telesis AT-S60 - Manual (Page 711)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 711
The Add New SNMPv3 Access Page is shown in Figure 250.
Figure 250 Add New SNMPv3 Access Page
5. In the Group Name field, enter a descriptive name of the group.
The Group Name can consist of up to 32 alphanumeric characters.
You are not required to enter a unique value here because the
SNMPv3 Access Table entry is indexed with the Group Name,
Security Model, and Security Level parameter values. However, a
unique group name makes it easier for you to tell the groups
apart.
There are four default values for this field that are reserved for
SNMPv1 and SNMPv2c implementations:
❑ defaultV1GroupReadOnly
❑ defaultV1GroupReadWrite
❑ defaultV2cGroupReadOnly
❑ defaultV2cGroupReadWrite
Note
The Context Prefix field is a read only field. The Context Prefix field is
always set to null.
6. In the Read View Name field, enter a value that you configured with
the View Name parameter in the SNMPv3 View Table.