Allied Telesis AT-S60 - Manual (Page 767)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 767
Configuring GVRP
To configure GVRP, perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration System Page is displayed with the General Tab
selected by default, as shown in Figure 192 on page 584.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 Page is displayed with the MAC Address Tab selected
by default, as shown in Figure 212 on page 634.
3. Select the GVRP Tab.
The GVRP Tab is shown in Figure 281.
Figure 281 Configuration Layer 2 Page, GVRP Tab
Note
When MSTP is enabled, the GVRP Tab is not shown.